Problems and solutions in the process of using the screen machine?

　　The number of revolutions of the sieve is not enough

　　Transmission tape is too loose

　　Tightening drive tape

　　Bearing heating

　　(1)Bearing lack of oil

　　Oiling

　　(2)Bearing fouling

　　Wash the bearing, replace the seal ring, check the seal

　　(3)Too much oil in the bearing or the quality of the oil does not meet the requirements

　　Check the oil filling condition

　　The vibration of the sieve is weak

　　The weight on the flywheel is not loaded correctly or is too light

　　Adjust the weight on the flywheel