Vibrating screen parent grid structure grid quick change network steps

　　Vibrating screen parent grid structure grid quick change network steps:

　　The screen in the vibrating screen component is a wearing part. In order to facilitate the user to change the screen, the company's technology is continuously improved. The commonly used vibrating screen frame structure is a sub-mother double-grid structure (U-groove) structure design, and the screen is used. Long life, no deformation of the mesh, the biggest feature is to change the network only 3-5 minutes.

　　The vibrating screen mother-type double-network structure is a quick-change network structure. The parent network is an 8-mesh network, and the subnet is a working network. For the subnet required for installation or replacement, please refer to the following steps:

　　1. Remove the layer loop and remove the screen frame. Other parts do not need to move.

　　2. Remove the damaged working net in the clamp, and then spread the new screen on the parent network to spread the flat clamp.

　　3. Cut off the extra screen that is reserved for 2 cm.

　　4, then install the screen frame, lock the bundle ring to complete.

　　The characteristics of the vibrating screen are: good sealing performance, convenient disassembly and assembly, easy to clean inside and outside, 360 degree adjustment of the discharge port, various screen cleaning devices, low energy consumption, low noise, no need for foundation installation, and the majority of powder, Wide application in industries such as pellets and liquids.